Our new Race Edition Inserts take the proven performance of the PRO V2 and elevate it with race-specific optimizations. Developed with input from the world’s fastest racers, these inserts meet the intense demands of Downhill and Enduro competition.
Less rotational weight- our inserts already offer some of the best weight to protection ratios available, but we know that when racing at the highest level, every gram counts. Race Edition weighs 20% less than our standard PRO V2 insert to minimise any added inertia from the insert.
Lower profile - Race Edition inserts take up 24% less room in your tyre compared to our standard inserts. Still big enough to provide a level of damping and support to the tyre, but offering a less transformative ride feel.
Easier to install - When access to spare or replacement components between races, outright rim protection is not as high a priority for race teams. Despite this, the inserts still play an important part in keeping air in the tyre. The lower profile also makes last minute fitting in between race runs easier. The Insert still provides a huge uplift in protection, very close to that of a full Pro V2 insert.
Rimpact inserts must be used in conjunction with an insert compatible valve design.
Use about 25% more sealant than recommended on the bottle to ensure the extra surface area of the insert is coated with plenty of fluid to spare. Our inserts are closed cell and cannot absorb liquid however some sealant will cling to the outside of the insert requiring a slightly higher dosage. It can be injected through Rimpact Valves but is best poured directly into the tyre.
Please follow installation instructions prior to fitting/removing. There is a QR scan code on the packaging that will link you to the installation page of this website.
Disclaimer: It is not advised to run air pressures outside that of the tyre manufacturers recommendations. Failure to do so may result in injury or the premature failure of the bicycle. Rimpact does not accept any responsibility for misuse of the Rimpact insert or improper installation.
Rimpact Inserts are designed to work WITH Rimpact Insert Compatible Valves.
Not included: Tyres, Sealant, Wheelset.
Contents Per Pack:
- 1x PRO Race Edition Tyre Insert.
- 1x 44mm or 55mm Rimpact Insert Compatible Valve or a set of Peaty’s Valves (not currently available as a single valve).
- 2x Die Cut Rim Stickers.
Part number: PRO-RE-1-29-44
Barcode: 5065015305613
Product code: RIM SIN RACE PRO 29
- New Lower Profile. Easier to Install. Lighter. Faster.
- 55mm Wide
- 6mm Pro Layer
- Compatible with 2.4” -2.6” Tyres
- Compatible with 25mm – 35mm Rims
- 130g – 29”